Powerflushing
in Maidstone
Cleaner systems. Warmer homes. Better performance.
Remove sludge and debris from your central heating system with a professional powerflush. Get your radiators heating properly again and help protect your boiler.
✓ GAS SAFE REGISTERED • ✓ LOCAL TO MAIDSTONE • ✓ RELIABLE SERVICE
Cold radiators?
Heating taking forever?
It might be sludge
in the system - not your boiler.
DOES THIS SOUND FAMILIAR?
Your heating could be telling you something.
Radiators cold at the bottom
A common sign of sludge collecting on the inside of your radiators.
Noisy boiler or system
Contamination and poor circulation can cause unwanted noise.
Heating takes ages to warm up
Restricted circulation can make the whole system slow to respond.
Radiators need bleeding often
Repeated problems deserve investigating rather than simply bleeding again.
Some rooms warmer than others
Poor circulation can prevent hot water reaching every radiator properly.
Dirty or discoloured water
Dark water can indicate corrosive products circulating within the system.
What does a powerflush actually do?
A powerflushing machine circulates water and specialist cleaning chemicals through your heating system to loosen and remove accumulated sludge, rust and debris.
Once the system has been cleaned, it is refilled and treated with corrosion inhibitor to help protect it against future corrosion.
Think of it as a deep clean of the inside of your heating system.
Before
After
What happens on the day?
A straightforward process carried out with professional equipment.
Check
We inspect the system and identify problems you're experiencing.
Connect
Professional powerflushing equipment is connected to your system.
Clean
Cleaning chemicals and water are circulated to loosen sludge and debris.
Flush
The radiators and heating circuit are worked through to remove contamination.
Protect
The system is refilled with water and corrosion inhibitors.
Test
We run the heating and check circulation and radiator performance.
What difference can it make?
Radiators heating more evenly
Fewer cold spots
Better circulation
Faster heating response
A quieter heating system
Less strain on heating components
Better protection for your boiler and system
Do I really need a powerflush?
Maybe. Maybe not.
A radiator that's not getting hot doesn't automatically mean the entire system needs powerflushing.
It could be sludge - but it could also be a valve problem, balancing issue, air in the system, pump problem or another fault.
We'll look at what your heating system is doing and recommend the appropriate solution.
No unnecessary work, Just straightforward advice
PROTECTING YOUR SYSTEM AFTER A POWERFLUSH
Keeping it clean is just as important.
A powerflush removes built-up sludge and magnetite from your heating system. In some systems, we may recommend fitting a magnetic system filter afterwards.
The filter continually captures magnetic debris circulating in the system before it can reach the boiler, helping to reduce future build-up and protect important boiler components.
✓ Captures circulating magnetite
✓ Helps protect the boiler
✓ Reduces future sludge build-up
✓ Can be cleaned during routine servicing
Does every system need a magnetic filter?
New boiler installations
Modern boiler installations are designed to protect the new boiler from contamination within the heating system, and a magnetic system filter is normally fitted as part of a new boiler installation.
Existing heating systems
If your system doesn't already have a magnetic filter, we may recommend fitting one following a powerflush. The filter helps capture circulating magnetite and magnetic debris, reducing the amount that can return to the boiler and helping protect the system from future build-up.
